Get LEGO® Ideas Books Are My Passion with purchases of 130 € or more*Learn more
Get LEGO® Ideas Books Are My Passion with purchases of 130 € or more*Learn more
Following instructions can be very therapeutic, but what happens when you rip up the rule book? We asked four builders experienced in the art of MOC (My Own Creation) builds to create a unique piece from the same starting point - the Floral Art set (31207). But how did their creative processes differ?
How many different brick-built creations can be made with the Floral Art set (31207)? Officially, three. Unofficially, more than you can shake a brick at. Just like any LEGO® set, all you really need is some creativity and the bravery to stray away from the instructions to create your own unique piece.
Our four builders all started with the same 2870 pieces, but were not restricted to just these pieces. Where they ended up and how they got there was entirely of their own making, which is part of the fun and creative process. Excited to see what they created? We are too. Read on to see how each builder took on the challenge.
David
My mosaic was inspired by a photograph of flowers my wife took in LEGOLAND® Billund some years ago, so the flower has come full circle from LEGOLAND to LEGO Art.
Finding the right colour took a bit more work however. I was more familiar with the square plates than the round plates in the set, so my first limitation was the colour scheme. However in the end I decided not to be constrained by those colours and thanks to the myriad of coloured 1x1 round tiles available in the compatible LEGO Dots range I broadened the palette available to me.
I must admit the design wasn’t just trial and error, I used an old software program called Pictobrick to help turn a photograph into a realistic first draft mosaic. The larger the image, the easier it is to design a more life-like mosaic, so I decided to make the image 50% larger than LEGO Art set 31207.
Like all custom creations, the tricky elements were all part of the fun. Recreating the spirals of the flower petals was a particular challenge, so the discovery of lavender pieces in LEGO Dots was extremely helpful. The bee on the rear flower was also tricky given its scale. In the end, I think the image came out very well, particularly because mosaic images can be unclear from up close, so I’m happy to say that its now hanging up in my LEGO room.
David’s top tips:
David Fennel
Re-introduction to LEGO bricks: David got back into LEGO bricks when his eldest child discovered them. He has been creating his own custom builds for 13 years.
Favourite set: Ninjago City 70620 because of its many clever details, such as the sushi restaurant.
First LEGO build as an adult: A custom build of Heuston train Station in Dublin
The set that got away: Statue of Liberty set (3450) released in 2000. Unfortunately, it was just too big for David to display.
Jaroslaw
Most of the models I build come from my own imagination. Sometimes I’ll see something on the street, on TV or on the internet and that will spark an idea too. I take inspiration from anywhere I can.
From the very beginning I had an idea to recreate a typical cross stitch style ‘Home Sweet Home’ sign. I had to build a few models before I was happy and all in all, I ended up creating six different versions. At each attempt, I could see how the models evolved to be more unique.
I had never made anything from the LEGO Art collection before, so my first version was just an attempt. When you look closely, it’s hard to see progress. You have to keep stepping away to see what’s working and what’s not. Trial and error can be a great way to get to your destination and can be a lot of fun.
By the fifth model, I decided to put two sets of 31207 together and build something bigger. I combined all the plates into one and created a branch with multi-coloured flowers. This was the hardest part because hundreds of small round elements had to be unhooked. In the end it was worth it because I think the larger model looked much better.
You can see how each of the above models evolves with each attempt to create something different, new and unique.
Jaroslaw’s top tips:
Jaroslaw
Stefan
I know that a lot of people use digital programs to design their MOCS, but I’m more old school. My process is usually a case of build and dissemble, then repeat until the final design convinces me.
What I discovered in this project is that it’s is quite hard to make a detailed design in such a small space (32x48 studs), so I wish I had of made a bigger version to hang in my living room. Overall, I am happy with the finished piece though. I loved how many colours were available in the set. There were infinite possibilities and as I always say, the limit is your imagination!
Stefan’s top tips:
Stefan
My-an
My process usually starts by thinking of a scene in my head. Then I think of the minifigures that I would include to the story. I always look at the details in my minifigures and try to use the details to add more character to the scene. I’m known in my LEGO community for quirky scenes.
For this project I wanted to build something that is very recognisable as a flower, so I went with a more realistic image. To start off with, I looked for images that I could use as inspiration. Once I found some I liked, I made a pattern for the build. That also made colour-matching a little bit more challenging. When I started building the piece, I made it traditionally flat. I then wanted to add a little bit more texture, so I added layering. The difficult part of layering is determining the boundaries of each layer as there is no defined outline in the image.
I hung the frame at the entrance of my bedroom so that I would always be reminded of the infinite ways you can create something out of a LEGO set. You are not limited to what is in the instruction books. The possibilities are endless and sometimes you will be surprised with what you can build, just the way I did with this piece, which I am incredibly proud of.
My-an’s top tips:
My-an
All four builders tackled the challenge in totally different ways. Some used software, some made multiple versions until they got it right and some just persisted and trusted their gut. All of them created beautiful, unique pieces. It just goes to show how many ways there are to create when you put the instructions aside and go for it.
